Roof Structural Assessment in Brisbane

A roof structural assessment in Brisbane is an engineering inspection of the timber or steel framing that holds up your roof, carried out when you notice sagging, damage or past alterations. It is for homeowners, buyers, strata managers and builders who need to know whether the roof structure is sound, and each assessment is completed by RPEQ-registered engineers.

We inspect the visible and safely accessible roof framing, supports and connections, then explain what we found, how significant it is and what should happen next.

Brisbane Weather, Older Roofs and What They Mean for Your Frame

Brisbane City Council lists severe storms among the most common natural disasters in the city, with the risk of large hail, damaging winds and heavy rainfall, and notes that Brisbane has intense storms in spring and in the hot, humid summer months. You can check the council’s guidance on disaster risk in Brisbane. Wind pulls upward on roof sheeting and pushes sideways on the whole structure, so tie-downs, batten fixings and bracing take most of that load. Hail and fallen branches add impact damage that is not always visible from the ground.

The age of Brisbane’s housing also matters. Many older timber homes have conventional pitched roofs built from rafters, underpurlins and struts that rely on internal walls for support. Over decades, those roofs often pick up extra loads, such as heavier replacement sheeting, solar panels or air-conditioning units, while internal walls below are removed in renovations. Later homes usually have prefabricated trusses, which can be weakened when webs or chords are cut for ducts, skylights or attic storage.

What the Roof Assessment Covers

Each Brisbane inspection follows the scope of our roof structural assessment service, focused on the issue that prompted your call:

  • Roof framing: trusses, rafters, ridge and hip members, underpurlins and struts, checked for sag, cracking, splits and decay.
  • Load path: how roof loads reach supporting walls, beams and posts, including walls that may have been altered below.
  • Connections: a visual check of accessible tie-downs, framing anchors, truss plates and batten fixings.
  • Bracing: roof bracing and ceiling diaphragm elements that help resist wind.
  • Modifications: framing cut or removed for services, solar, skylights or roof-space storage.
  • Written report: findings with photos, our assessment of structural significance and recommended next steps, such as monitoring, repair design or further investigation.

A full wind-compliance review of every concealed connection is a separate design task and depends on access, so we agree that scope with you in advance if it is needed.

Our Inspection Process

  1. Scope review: you describe the concern and send photos; we confirm what the inspection will address.
  2. Exterior check: the engineer looks at the roofline, eaves, gutters and verandah from the ground for dips and distortion.
  3. Roof cavity inspection: where safe access exists, we inspect framing members, joints and connections inside the roof space.
  4. Interior check: ceilings, cornices and supporting walls are reviewed for cracking or deflection linked to the roof.
  5. Report: you receive a written report with findings and recommendations.

Common Roof Problems We See in Brisbane

In older suburbs such as Ashgrove, The Gap, Toowong and Indooroopilly, mature trees near the house mean branch impact is a frequent reason for a call after a storm. When the damage follows a specific weather event, our post-storm damage structural inspection in Brisbane looks at the whole house, not only the roof.

In inner-north and inner-east suburbs such as Windsor, Kedron, Coorparoo and Camp Hill, many renovated Queenslanders have had internal walls removed or relocated over the years. A sagging ridge or a dropped ceiling in these homes can often be traced to a strut that lost its support when a wall came out. Newer homes in growth areas tend to show different issues, such as truss webs cut during air-conditioning installation or trusses overloaded by stored items.

Buyers also ask for roof checks when an older home shows a wavy roofline or prior alterations. If you are about to purchase, a pre-purchase structural inspection in Brisbane can include the roof structure as part of a broader structural review.

Warning Signs That Need an Engineer

Our guide on when a roof structural assessment is needed covers this in more depth, but contact an engineer if you notice:

  • a sagging ridge line, wavy roof sheeting or eaves that dip between supports;
  • ceilings that are cracking, bulging or pulling away from cornices;
  • broken or split timbers, loose truss plates or rusted steel members in the roof space;
  • framing that has been cut, notched or removed for ducts, skylights or solar;
  • doors and windows that start to stick after an internal wall was removed;
  • visible movement or noise in the roof during strong winds, or damage after a tree or branch impact.

If a ceiling is actively dropping or a member has clearly broken, keep people out of the area and arrange an inspection promptly.

Roof Assessment FAQ

Is a roof structural assessment the same as a roof plumber’s inspection?

No. A roof plumber looks at sheeting, flashings and gutters for leaks. A structural assessment looks at the framing that carries the roof and whether it is performing safely.

Do you need to get into the roof space?

Where it is safe, yes, because most framing defects are only visible from inside. If access is limited, the report states what could not be seen.

Can you design the repair as well?

Yes. If the inspection finds a problem, we can prepare a repair or strengthening design as a follow-on engagement.

Can I add solar panels to an older roof?

Often, but the framing should be checked for the added load and the fixing points. An engineer can confirm whether any strengthening is needed first.

Concerned about your roof? Our RPEQ engineers can inspect the framing and give you a clear report on the next step. See our full range of structural engineering services in Brisbane, or contact our team to book a roof structural assessment.

Explore Brisbane Services

What Our Clients Say

Top rated
Ostanes Engineering4.9
Based on 103 reviews
Zeenet S.
2 months ago
We are so happy with their service. The team was so quick to help us when we needed an urgent report. From admin to engineer, we felt supported and given very knowledgeable feedback. Thanks team, you’re awesome!
Response from the owner:Thank you for your kind feedback, Zeenet. We’re pleased we could assist promptly and appreciate you taking the time to share your experience. ⁣ 𝘖𝘴𝘵𝘢𝘯𝘦𝘴 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘛𝘦𝘢𝘮
Russell J.
3 months ago
We used Ostanes to assess a support bean that had seen better days. Excellent and prompt service. The report helped identify the remediation work required.
Response from the owner:Thank you, Russell, for your review. We’re glad we could assist promptly with the structural assessment of the support beam and provide a clear report identifying the remediation required. We appreciate your support of Ostanes Engineering.
steven S.
5 months ago
I was very happy with the services from ostanes, the in-depth of inspection and reporting was great. Turnaround time for reporting was exceptional. Was very personable and able to explain process in a common language.
Response from the owner:Thank you Steven for your kind review. We’re glad you were happy with the inspection and report, and that the findings were explained clearly in simple terms. We appreciate your feedback and support of Ostanes Engineering.
Youngjun K.
6 months ago
Good and fast service. Helpful
Response from the owner:Thank you Youngjun for your review. We’re glad we could assist and that you found our service fast and helpful. We appreciate your feedback.
brett I.
6 months ago
The work that Ostanes Engineering has done are incredible, my job was urgent and they accommodate for my needs. I highly recommend them for any work that needs doing.
Response from the owner:Thank you Brett for your kind words. We’re glad we could accommodate your needs and provide the service you were after. We really appreciate your recommendation and support.
Katia
10 months ago
Ostanes carried out a structural integrity inspection in our home: Dr Shoja was very knowledgeable and thorough. He explained everything he was looking at and why; as well as given us lots of practical advice which was related to structural integrity and otherwise.
Response from the owner:Thank you Katia for your thoughtful review. We’re glad Dr Shoja was able to assist with the structural integrity inspection and clearly explain the findings and practical advice. We appreciate your feedback and support of Ostanes Engineering.
Rebecca T.
12 months ago
Ostanes were great right from the outset - they responded very promptly even on the weekend and we had the inspection and structural engineering report within two days of first contacting them. The admin staff and engineer were both very friendly, helpful and communicative - we'd be happy to use them again. Thank you!
Response from the owner:Thank you so much, Rebecca! We’re really glad we could assist you quickly and that your experience with both our admin team and engineer was a positive one. We always aim to make the process smooth, clear, and timely, so it’s wonderful to hear that reflected in your feedback. We truly appreciate your kind words and would be more than happy to help you again anytime. 𝐓𝐡𝐚𝐧𝐤 𝐲𝐨𝐮 𝐟𝐨𝐫 𝐜𝐡𝐨𝐨𝐬𝐢𝐧𝐠 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠!
Adrian R.
1 year ago
Ostanes have been fantastic to deal with from start to finish. Prompt turnaround times, great correspondence and advice. A small project for a Home Builder for a bathroom extension was made easy by their engineering know how and support every step of the way. Would highly recommend. Thanks to the whole team!
Response from the owner:Thank you, Adrian! We’re glad we could support your project with clear advice and quick turnaround. We appreciate the recommendation and look forward to helping again anytime! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Liz A.
1 year ago
We had a underpinning company quote us $10,000+ to fix an issue with our house foundation. I wanted to get a 2nd opinion and that of a structural engineer because i didn't want to pay for something i didn't need. Shoja was very knowledgeable and thorough. He checked our entire house for structural issues and concluded that the house was fine and didn't need underpinning!! They also don't carry put work that they recommend to avoid conflict of interest. I am so glad we found them, it has saved us tens of thousands of dollar of unnecessary work
Response from the owner:Lisan, we’re really pleased we could help you get a clear and independent assessment. Dr. Shoja was happy to take the time to check everything thoroughly, and it’s great to hear the outcome saved you from unnecessary work and expense. If you ever need guidance again, we’re here to help anytime! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Johanna D.
1 year ago
Great experience with Ostanes. Shoja was extremely knowledgeable and helpful. Pricing was fair for the excellent quality service.
Response from the owner:Johanna, we’re glad to hear the service and support hit the mark for you. Thank you for recognizing Dr. Shoja’s expertise and the value of our work — we truly appreciate it! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Get In Touch

Discuss Your Brisbane Project With a BPEQ Engineer

Need certified structural design, independent defect investigation, or council approval documentation in Brisbane? Contact our engineering team for expert technical advice and a competitive quote.

Speak with an Engineer