Wall Removal Structural Engineering in Brisbane

Wall removal structural engineering in Brisbane is the design work that lets you take out or open up a load-bearing wall without leaving the roof, ceiling or upper floor unsupported. It suits homeowners, builders and renovators planning open-plan living, a wider kitchen opening or a new doorway, and every design is prepared and certified by RPEQ-registered engineers.

Before any wall comes down, we confirm what the wall is actually carrying, then design a replacement load path made up of a beam, posts, connections and footings that your builder can install and your certifier can assess.

Brisbane Houses and Why Wall Removal Needs Care Here

Brisbane’s housing stock mixes timber Queenslanders and post-war highset homes with brick veneer and slab-on-ground houses from later decades. Each type carries load differently. In an older timber home, an internal wall may support ceiling joists, hanging beams or roof struts, and the floor below often sits on stumps rather than a slab, so a new post may need its own footing in the subfloor. In a brick veneer house on a slab, a removed wall may have been part of the bracing system that resists wind, even if it carries little vertical load.

Approvals also matter. Brisbane City Council advises that you will need building approval before starting work on extensions, raising and renovations, and that renovations involving only internal works are unlikely to need planning approval. Houses built in or before 1946, and properties in the Traditional building character overlay, can trigger additional planning assessment for some works, so it pays to check early. You can read the council’s guidance on extensions, raising or renovations in Brisbane. Your building certifier decides what approval applies to your specific project; our role is to provide the engineering they need.

What Our Wall Removal Engagement Covers

Our Brisbane engagements follow the same engineering method as our wall removal engineering service, applied to the house in front of us. A typical scope includes:

  • Load assessment: identifying what the wall supports, including roof, ceiling, floor and bracing loads, based on a site visit or the information you provide.
  • Beam design: sizing a steel or LVL timber beam, either dropped below the ceiling or set flush within the roof space where the framing allows.
  • Posts and connections: specifying posts, studs and connection details that carry beam reactions down to the floor structure.
  • Footings and subfloor support: pad footings, slab thickening or new piers where concentrated loads land.
  • Bracing review: checking whether lost bracing needs to be replaced elsewhere in the house.
  • Drawings and certification: structural drawings and a design certificate (Form 15) for your certifier, where the project requires it.

How the Process Works

  1. Share your plans: send photos, a floor plan sketch and a description of the opening you want.
  2. Site inspection: an engineer checks the roof space, the wall and, where accessible, the subfloor to trace the load path.
  3. Design and calculation: we size the beam, posts and footings and check deflection so the new ceiling line stays tidy.
  4. Documentation: you receive structural drawings and certification suitable to pass to your builder and certifier.
  5. Builder questions: we answer queries about the design during construction if the builder needs clarification.

Typical Wall Removal Situations Across Brisbane

Many requests come from owners opening up older homes in suburbs such as Paddington, Red Hill, Bardon and Wilston, where a closed kitchen sits behind a central hallway wall. In these timber houses, the wall below a hip or valley often supports roof struts, and the replacement beam has to pick up those point loads. Wall removal is often one part of a larger job, and our home renovation structural engineering in Brisbane covers the wider scope when you are also moving bathrooms, adding windows or restructuring the floor.

In suburbs with more 1970s to 1990s brick veneer homes, such as Carindale, Chermside and Kenmore, the common request is joining a formal lounge and family room. Here, roof trusses usually span to the outer walls, but internal walls can still carry girder truss loads or act as bracing walls. When the opening is part of an addition, our house extension structural engineering in Brisbane combines the new structure and the altered walls into one design.

Two-storey homes need extra care because a ground-floor wall may support the upper floor, an upstairs wall and part of the roof at the same time. These openings usually need steel beams, heavier posts and properly sized footings.

When to Call an Engineer Before Removing a Wall

Not every wall is load-bearing, but you should not assume. If you are unsure, our guide on how to tell if a wall is load-bearing explains the usual clues. Contact an engineer before demolition if:

  • the wall runs at right angles to ceiling joists or sits under a roof strut, girder truss or hanging beam;
  • there is a wall, post or heavy item directly above it on an upper floor;
  • the wall contains diagonal bracing, sheet bracing or is noted as a bracing wall on old plans;
  • you see sagging ceilings, sticking doors or cracked plaster near the wall, which may point to existing load problems;
  • a previous owner has already removed part of the wall without paperwork.

If a wall has already been removed without engineering, stop further work and arrange an inspection so temporary propping and a retrospective design can be considered.

Wall Removal Engineering FAQ

Do I need council approval to remove an internal wall in Brisbane?

Removing a load-bearing wall is building work that generally needs building approval through a licensed building certifier. Internal-only work is unlikely to need planning approval, but character and pre-1946 homes can be different. Your certifier will confirm what applies.

Can the new beam be hidden in the ceiling?

Often yes. A flush beam sits within the roof space so the ceiling stays flat, but it depends on the roof framing, available depth and how the ceiling joists can be connected. We confirm this after inspecting the roof space.

Steel or timber beam?

Both can work. LVL timber is lighter and easy to fix to existing framing, while steel suits longer spans and heavier loads. We choose based on span, load and the space available.

Can you assess a wall that has already been removed?

Yes. We can inspect the existing opening, assess how the loads are currently supported and design any strengthening needed so your certifier can consider the work.

Planning to open up your Brisbane home? Our RPEQ engineers can review your wall, design the beam and footings and prepare the documents your certifier needs. Explore more structural engineering services in Brisbane, or contact our team to discuss your wall removal project.

Explore Brisbane Services

What Our Clients Say

Top rated
Ostanes Engineering4.9
Based on 103 reviews
Zeenet S.
2 months ago
We are so happy with their service. The team was so quick to help us when we needed an urgent report. From admin to engineer, we felt supported and given very knowledgeable feedback. Thanks team, you’re awesome!
Response from the owner:Thank you for your kind feedback, Zeenet. We’re pleased we could assist promptly and appreciate you taking the time to share your experience. ⁣ 𝘖𝘴𝘵𝘢𝘯𝘦𝘴 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘛𝘦𝘢𝘮
Russell J.
3 months ago
We used Ostanes to assess a support bean that had seen better days. Excellent and prompt service. The report helped identify the remediation work required.
Response from the owner:Thank you, Russell, for your review. We’re glad we could assist promptly with the structural assessment of the support beam and provide a clear report identifying the remediation required. We appreciate your support of Ostanes Engineering.
steven S.
5 months ago
I was very happy with the services from ostanes, the in-depth of inspection and reporting was great. Turnaround time for reporting was exceptional. Was very personable and able to explain process in a common language.
Response from the owner:Thank you Steven for your kind review. We’re glad you were happy with the inspection and report, and that the findings were explained clearly in simple terms. We appreciate your feedback and support of Ostanes Engineering.
Youngjun K.
6 months ago
Good and fast service. Helpful
Response from the owner:Thank you Youngjun for your review. We’re glad we could assist and that you found our service fast and helpful. We appreciate your feedback.
brett I.
6 months ago
The work that Ostanes Engineering has done are incredible, my job was urgent and they accommodate for my needs. I highly recommend them for any work that needs doing.
Response from the owner:Thank you Brett for your kind words. We’re glad we could accommodate your needs and provide the service you were after. We really appreciate your recommendation and support.
Katia
10 months ago
Ostanes carried out a structural integrity inspection in our home: Dr Shoja was very knowledgeable and thorough. He explained everything he was looking at and why; as well as given us lots of practical advice which was related to structural integrity and otherwise.
Response from the owner:Thank you Katia for your thoughtful review. We’re glad Dr Shoja was able to assist with the structural integrity inspection and clearly explain the findings and practical advice. We appreciate your feedback and support of Ostanes Engineering.
Rebecca T.
12 months ago
Ostanes were great right from the outset - they responded very promptly even on the weekend and we had the inspection and structural engineering report within two days of first contacting them. The admin staff and engineer were both very friendly, helpful and communicative - we'd be happy to use them again. Thank you!
Response from the owner:Thank you so much, Rebecca! We’re really glad we could assist you quickly and that your experience with both our admin team and engineer was a positive one. We always aim to make the process smooth, clear, and timely, so it’s wonderful to hear that reflected in your feedback. We truly appreciate your kind words and would be more than happy to help you again anytime. 𝐓𝐡𝐚𝐧𝐤 𝐲𝐨𝐮 𝐟𝐨𝐫 𝐜𝐡𝐨𝐨𝐬𝐢𝐧𝐠 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠!
Adrian R.
1 year ago
Ostanes have been fantastic to deal with from start to finish. Prompt turnaround times, great correspondence and advice. A small project for a Home Builder for a bathroom extension was made easy by their engineering know how and support every step of the way. Would highly recommend. Thanks to the whole team!
Response from the owner:Thank you, Adrian! We’re glad we could support your project with clear advice and quick turnaround. We appreciate the recommendation and look forward to helping again anytime! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Liz A.
1 year ago
We had a underpinning company quote us $10,000+ to fix an issue with our house foundation. I wanted to get a 2nd opinion and that of a structural engineer because i didn't want to pay for something i didn't need. Shoja was very knowledgeable and thorough. He checked our entire house for structural issues and concluded that the house was fine and didn't need underpinning!! They also don't carry put work that they recommend to avoid conflict of interest. I am so glad we found them, it has saved us tens of thousands of dollar of unnecessary work
Response from the owner:Lisan, we’re really pleased we could help you get a clear and independent assessment. Dr. Shoja was happy to take the time to check everything thoroughly, and it’s great to hear the outcome saved you from unnecessary work and expense. If you ever need guidance again, we’re here to help anytime! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Johanna D.
1 year ago
Great experience with Ostanes. Shoja was extremely knowledgeable and helpful. Pricing was fair for the excellent quality service.
Response from the owner:Johanna, we’re glad to hear the service and support hit the mark for you. Thank you for recognizing Dr. Shoja’s expertise and the value of our work — we truly appreciate it! 𝐎𝐬𝐭𝐚𝐧𝐞𝐬 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠
Get In Touch

Discuss Your Brisbane Project With a BPEQ Engineer

Need certified structural design, independent defect investigation, or council approval documentation in Brisbane? Contact our engineering team for expert technical advice and a competitive quote.

Speak with an Engineer